|Model 800, Urology C-Arm Table.|
ACCOMMODATES BARIATRIC PATIENTS|
Configure to your exact specifications
When stability, access, and precise, quiet, vibration-free positioning are essential
The Urology C-Arm Table is an ideal choice for image-guided procedures. The narrow Fiberesin™ tabletop is cantilevered to accommodate portable or ceiling suspended C-Arms. Radiolucent areas are free of cross members, allowing full fluoroscopic visualization and unobstructed C-Arm positioning. Functional design provides complete access while minimizing radiation exposure to clinicians.
The Urology C-Arm Table features motorized actuation of height, X-Y, lateral roll and Trendelenburg motions of the tabletop. Multiple positioning control options with pre-programmed features ensure quick and safe tabletop positioning during any phase of a procedure. The rail-mounted main control panel, portable hand-held controller, and foot-operated controller can be positioned for convenient access from any point around the table.
Control made easy
The LCD screen of the Main Control Panel displays actual tabletop position (all axes) in real time, and provides menus and prompts for other functions. Up to ten position sets may be stored in system memory. A "Level" button brings the table to 0° tilt and 0° lateral roll while "Home" both levels and lowers the tabletop to minimum height for patient transfer. The portable hand-held and foot-operated controllers offer the freedom to adjust the table from other areas around the table. The Joystick Controller is used for motorized X-Y positioning and features proportional speed control.
More adjustments and features...
The Fowler back adjusts with a simple touch-handle lock/unlock mechanism to an 80° angle with incremental stops at 20°, 30°, 40°, 50°, 60°, 70° and 80°.
The table comes equipped with a lightweight non-imaging patient transfer extension and a radiolucent extension. The radiolucent extension provides capability for vascular, cardiac, and other general C-Arm applications. Whether you select knee crutches or the PAL Stirrups, arm boards or drain pans, the choice is yours. Biodex lets you configure the rest of the table to your exact specifications.
Both AC and battery power are standard. When operating on battery, there are no power cords to catch on feet or block table wheels. Battery charging can be accomplished during off hours by plugging in the AC power cord. An optional battery with separate charging unit can provide continuous cordless operation.
Quick, safe control
Main Control Panel - The main panel with backlit liquid crystal display mounts on either accessory rail. The LCD screen displays actual tabletop position (all axes) in real time, and provides menus and prompts for other functions. Up to ten position sets may be stored in system memory, and recalled at any time for automatic positioning. A "Level" button brings the table to 0° tilt and 0° lateral roll. "Home" levels the table and lowers the tabletop to minimum height for patient transfer. Control buttons are identified with easily recognizable icons.
Hand-held & Foot Controllers - The portable hand-held and foot-operated controllers offer the freedom to adjust height, lateral roll, X-Y and Trendelenburg motions from positions away from the main panel, or when hands are busy with other functions. The hand-held controller hangs on the accessory rail when not in use.
Joystick Controller - The joystick controller for motorized X-Y positioning offers intuitive positioning with
|proportional speed control.
After setting an adjustable icon indicator on the joystick's base, X-Y motion correlates directionally to actual
tabletop motion. To prevent undesired motion by accidental contact with the joystick, a thumb button on top of the
joystick must be pressed for activation.|
As required by law, all Biodex C-Arm tables are CDRH registered and FDA Device Listed. All motorized tables are ETL product listed to the UL-60601-1 Medical Electrical Equipment Safety Standard.
Dimensions: 84.5" l x 25.5" w (214.6 x 64.8 cm) with OR accessory rails
Tabletop: 53" l x 21" w (134.6 x 53.3 cm); 84" l (213.4 cm) with extension
Lightweight Extension (For patient transfer only, not for imaging.): 26.5" l x 21" w (67.3 x 53.3 cm)
Radiolucent Extension: 31" l x 25.5" w (78.7 x 64.8 cm) with OR accessory rails
Radiolucent Area: 54" l x 17.5" w (137.2 x 44.5 cm)
Tabletop Material: Three Fiberesin&trsde; sections - each with individual 2" mattress
Table Sections: Four Sections: Adjustable Fowler back 0° to 80°; abdominal section with cutout; radiolucent removable extension and a lightweight non-imaging transfer extension for transferring patients on/off the table
Mattress: Individual, Seamless, 2" thick (5 cm), one for each section
- Height Adjustable: 34" to 43.5" (86.4 to 110.5 cm)Controls:
- Tabletop X Motion (head-to-toe): 20" (51 cm)
- Tabletop Y Motion (side-to-side): 10" (25.4 cm)
- Trendelenburg: 0° to 20°br> - Reverse Trendelenburg: 0° to 20°
- Lateral Roll: 0° to 20°
- Fowler Back: Adjusts from 0° to 80° with touch handle lock/unlock
- Hand Control: activates all motionsOptional:
- Foot Control: activates all motions
- Main Control Panel: LCD screen displays actual tabletop position (all axes) in real time, and provides menus and prompts for other functions
- Joystick Controller: for motorized X-Y positioning
- X-Ray Film Tray: Removable film cassette tray for 14" x 17" film with cassette mask for 10" x 12" film. Film cassette tray can be removed from either side of the table.Wheels:
- X-Ray Grid: Removable X-Ray grid, 103 line, 8:1 ratio
- Foot End - 3" (7.62 cm) locking swivel castersAccessory Rails: Standard OR accessory rails 1.125" x .375" (2.86 x .95 cm) on table (rails also on table imaging extension)
- Head End - 5" (12.7 cm) swivel casters with central locking
Patient Restraints: Two body straps, two ankle straps
Finish: Powder coat
Shipping Weight: 903 lbs.
Patient Capacity: 400 lb (181.4 kg); weight tested to four times the patient load rating.
Power: 115 VAC or 230 VAC and Battery. Battery automatically charges when table is plugged in. An additional battery can be charged with optional wall-mounted charger.
Warranty: Two years
Certifications: ETL and cETL listed to UL-60601-1, CAN/CSA C22.2 No.: 601-1-M90, EN 60601-1, IEC 60601-1-2:2001-09
Phone Toll Free:
|Lead Apron.com Inc.
A pnwx company